OSPF C
OMMANDS
SHOW IP OSPF INTERFACE
show ip ospf interface
Overview
Use this command to display interface information for OSPF.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show ip ospf interface [<interface-name>]
Mode
User Exec and Privileged Exec
awplus#
Examples
Output
Figure 20-17: Example output from the show ip ospf interface command
vlan2 is up, line protocol is up
Internet Address 1.1.1.1/24, Area 0.0.0.0, MTU 1500
Process ID 0, Router ID 33.33.33.33, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1, TE Metric 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Neighbor Count is 0, Adjacent neighbor count is 0
Crypt Sequence Number is 1106347721
Hello received 0 sent 1, DD received 0 sent 0
LS-Req received 0 sent 0, LS-Upd received 0 sent 0
LS-Ack received 0 sent 0, Discarded 0
C613-50077-01 REV A
Guide.
Parameter
<interface-name>
show ip ospf interface vlan2
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
Description
The VLAN name, for example vlan3.
825