Debug Ipv6 Ospf Nfsm - Allied Telesis AT-AR3050S Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
DEBUG IPV OSPF NFSM

debug ipv6 ospf nfsm

Overview This command enables debugging options for IPv6 OSPF Neighbor Finite State
Machines (NFSMs).
To enable all debugging options, specify debug ipv6 ospf nfsm with no
additional parameters.
The no and undebug variants of this command disable IPv6 OSPF NFSM
debugging. Use this command without parameters to disable all the options.
debug ipv6 ospf nfsm [events] [status] [timers]
Syntax
no debug ipv6 ospf nfsm [events] [status] [timers]
Mode Privileged Exec and Global Configuration
Examples To enable IPv6 debugging option to display timer information, use the following
command:
awplus#
Related terminal monitor
Commands
undebug ipv6 ospf nfsm
C613-50077-01 REV A
Parameter Description
events
Displays NFSM event information.
status
Displays NSFM status information.
timers
Displays NFSM timer information.
debug ipv6 ospf nfsm timers
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
867