Default Log Console - Allied Telesis AT-AR3050S Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG CONSOLE

default log console
Overview This command restores the default settings for log messages sent to the terminal
when a
console when a log console command is issued.
default log console
Syntax
Mode Global Configuration
Example To restore the log console to its default settings use the following commands:
awplus#
awplus(config)#
Validation show log config
Commands
Related log console
Commands
log console (filter)
C613-50077-01 REV A
log console command is issued. By default all messages are sent to the
configure terminal
default log console
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
310