Show Spanning-Tree Statistics Instance - Allied Telesis AT-AR3050S Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS INSTANCE

show spanning-tree statistics instance

Overview This command displays BPDU (Bridge Protocol Data Unit) statistics for the specified
MST (Multiple Spanning Tree) instance, and all switch ports associated with that
MST instance.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show spanning-tree statistics instance <instance>
Syntax
Mode Privileged Exec
Usage To display BPDU statistics information for MST instance 2, and all switch ports
associated with that MST instance, use the command:
awplus#
Output Figure 13-14: Example output from show spanning-tree statistics instance
Related show spanning-tree statistics
Commands
C613-50077-01 REV A
Guide.
Parameter Description
<instance>
Specify an MSTP instance in the range <1-15>.
show spanning-tree statistics instance 2
% % INST_PORT port1.0.3 Information & Statistics
% ----------------------------------------
% Config Bpdu's xmitted (port/inst)
% Config Bpdu's received (port/inst)
% TCN Bpdu's xmitted (port/inst)
% TCN Bpdu's received (port/inst)
% Message Age(port/Inst)
% port1.0.3: Forward Transitions
% Next State
% Topology Change Time
...
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
: (0/0)
: (0/0)
: (0/0)
: (0/0)
: (0/0)
: Learning
: 0
: 0
476