Show Running-Config Dpi - Allied Telesis AT-AR3050S Command Reference Manual

F M C
ILE ANAGEMENT OMMANDS
-
SHOW RUNNING CONFIG DPI

show running-config dpi

Overview Use this command to show the configuration commands that have been used to
configure DPI.
show running-config dpi
Syntax
Mode Privileged Exec
Examples To show the configuration commands that have been used to configure DPI, use
the command:
awplus#
Output Figure 2-14: Example output from the show running-config dpi command on
awplus#show running-config dpi
dpi
provider procera
enable
!
C613-50077-01 REV A
show running-config dpi
the console.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
142