Remove No 3 Chain Tensioner Assembly/Camshaft Bearing Cap - Toyota 2GR-FE Manual

Front View
Knock Pin
4
8
3
7
5
11
7
13
10
12
6
2GR-FE ENGINE MECHANICAL – ENGINE UNIT
42. REMOVE NO. 3 CHAIN TENSIONER ASSEMBLY
(a) Remove the bolt and No. 3 chain tensioner.
A109722
43. REMOVE CAMSHAFT BEARING CAP (for Bank 2)
(a) Check that the camshafts are positioned as shown
A129706E01
(b) Uniformly loosen and remove the 8 bearing cap
2
6
5
1
A134891E03
(c) Uniformly loosen and remove the 13 bearing cap
8
2
4
(d) Remove the 5 bearing caps.
1
44. REMOVE NO. 3 CAMSHAFT
9
(a) Remove the No. 3 camshaft.
3
45. REMOVE NO. 4 CAMSHAFT
A129708E01
(a) Remove the No. 4 camshaft.
in the illustration.
bolts in the sequence shown in the illustration.
bolts in the sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the
camshaft level.
EM–79
EM