Toyota 2GR-FE Manual page 964

ST–102
MAIN BODY:
Item
SHIFT P SIG
OK
7
READ VALUE OF INTELLIGENT TESTER (STOP LIGHT SWITCH)
MAIN BODY:
Item
STOP LAMP SW
OK
8
READ VALUE OF INTELLIGENT TESTER (STEERING LOCK)
MAIN BODY:
ST
Item
STR UNLOCK SW
2GR-FE STARTING – SMART KEY SYSTEM
(b) Turn the engine switch on (IG).
(c) Read the DATA LIST according to the displays on the
tester screen.
Measurement Item/Range
(Display)
Shift P signal / ON or OFF
OK:
ON (P signal is ON) and OFF (P signal is OFF)
appear on the screen.
HINT:
If the result is not as specified, perform troubleshooting
for DTC B2281 first (See page ST-60).
NG
(a) Connect the intelligent tester to the DLC3.
(b) Turn the engine switch on (IG).
(c) Check the DATA LIST for proper functioning of the stop
light switch.
Measurement Item/Display
(Range)
Stop light Switch / ON or OFF
OK:
ON (brake pedal depressed) and OFF (brake pedal
released) appear on the screen.
HINT:
If the result is not as specified, perform troubleshooting
for DTC B2284 first (See page ST-72).
NG
(a) Connect the intelligent tester to the DLC3.
(b) Turn the engine switch on (IG).
Measurement Item/Display
(Range)
Steering lock condition / ON or
OFF
OK:
ON (steering is unlocked) and OFF (steering is
locked) appear on the screen.
Normal Condition
ON: Shift position is P
OFF: Shift position is not P
GO TO DTC B2281
Normal Condition
ON: Brake pedal depressed
OFF: Brake pedal released
GO TO DTC B2284
Normal Condition
ON: Steering is unlocked
OFF: Steering is locked
Diagnostic Note
-
Diagnostic Note
-
Diagnostic Note
-