Toyota 2GR-FE Manual page 894

ST–32
Brake Pedal
Depressed
Not depressed
-
-
START
STOP
Power Source Mode/Condition
off
on (ACC, IG)
Engine running
Steering lock not unlocked
System malfunction
ST
2GR-FE STARTING – SMART KEY SYSTEM
ON-VEHICLE INSPECTION
1.
Shift Lever
When the engine switch is pushed once.
off → engine start
•
P or N Position
on (ACC) → engine start
•
on (IG) → engine start
•
Each time the engine switch is pushed.
P position
off → on (ACC) → on (IG) → off
•
Each time the engine switch is pushed.
Except P Position
off → on (ACC) → on (IG) → on (ACC)
•
When the engine switch is pushed with power source mode on (IG) (engine running).
P Position
on (IG) → off
•
When the engine switch is pushed with power source mode on (IG) (engine running).
Except P Position
on (IG) → on (ACC)
•
2.
Indicator Light
A109251E01
Brake pedal released
ON (Amber)
Flashes (Green) for 15 sec.
Flashes (Amber) for 15 sec.
CHECK POWER SOURCE MODE CHANGE
FUNCTION
(a) Check the function of the engine switch.
(1) Check that power source mode changes in
accordance with the conditions of the shift
position and brake pedal.
Power Source Mode Pattern
(b) Check if power source mode changes without
pressing the engine switch.
(1) With power source mode on (ACC) and the
shift position in P, wait for at least 1 hour. Check
that power source mode changes from on
(ACC) to off automatically.
CHECK INDICATOR CONDITION
(a) Check the indicator on the engine switch.
(1) Check that the engine switch indicator turns on
and changes color according to the table
below.
Indicator Light Condition
Brake pedal depressed, shift lever in P or N
OFF ON (Green) (When key and vehicle IDs match)
OFF
ON (Green)
OFF
Flashes (Green) for 15 sec.
Flashes (Amber) for 15 sec.