Toyota 2GR-FE Manual page 678

ES–510
ES
2GR-FE ENGINE CONTROL SYSTEM – KNOCK SENSOR
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE (See page
FU-13)
2. REMOVE ENGINE UNDER COVER LH
3. REMOVE ENGINE UNDER COVER RH
4. DRAIN ENGINE COOLANT (See page CO-5)
5. REMOVE WINDSHIELD WIPER ARM AND BLADE
ASSEMBLY LH (See page WW-9)
6. REMOVE WINDSHIELD WIPER ARM AND BLADE
ASSEMBLY RH (See page WW-9)
7. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
(See page WW-9)
8. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
(See page WW-9)
9. REMOVE COWL TOP VENTILATOR LOUVER SUB-
ASSEMBLY (See page WW-10)
10. REMOVE WINDSHIELD WIPER MOTOR AND LINK
(See page WW-10)
11. REMOVE COWL TOP PANEL OUTER SUB-
ASSEMBLY (See page ES-481)
12. REMOVE COOL AIR INTAKE DUCT SEAL (See page
ES-481)
13. REMOVE V-BANK COVER SUB-ASSEMBLY (See
page EM-23)
14. REMOVE AIR CLEANER INLET ASSEMBLY (See
page EM-24)
15. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-503)
16. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (See
page EM-24)
17. REMOVE NO. 1 AIR CLEANER INLET (See page
24)
18. REMOVE INTAKE AIR SURGE TANK (See page
13)
19. SEPARATE FUEL TUBE SUB-ASSEMBLY (See page
EM-28)
20. REMOVE INTAKE MANIFOLD (See page EM-32)
EM-
FU-