Toyota 2GR-FE Manual page 411

3
CHECK VVT SENSOR FOR EXHAUST CAMSHAFT (SENSOR INSTALLATION)
Clearance
Normal
OK
4
CHECK EXHAUST CAMSHAFT
OK
5
REPLACE VVT SENSOR
NEXT
6
CHECK WHETHER DTC OUTPUT RECURS
Result
Display (DTC Output)
No output
P0365, P0352, P0353, P0354, P0355 or P0356
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
(a) Check the VVT sensor installation condition.
OK:
Sensor is installed correctly.
NG
Abnormal
BR03795E18
(a) Check the teeth of the camshaft.
NG
(a) Connect the intelligent tester to the DLC3.
(b) Turn the ignition switch on (IG).
(c) Turn the intelligent tester on.
(d) Clear the DTCs (See page ES-45).
(e) Select the following menu items: DIAGNOSIS /
ENHANCED OBD II / DTC INFO / PENDING CODES.
(f) Read the DTCs.
HINT:
If the engine does not start, replace the ECM.
B
REPAIR OR REPLACE VVT SENSOR
REPLACE EXHAUST CAMSHAFT
Proceed to
A
B
REPLACE ECM (See page ES-518)
ES–255
ES