Toyota 2GR-FE Manual page 656

2GR-FE ENGINE CONTROL SYSTEM – VVT SENSOR
19. REMOVE VVT SENSOR (for Bank 1 Exhaust Side)
(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
A135702
20. REMOVE VVT SENSOR (for Bank 2 Intake Side)
(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
A135700
21. REMOVE VVT SENSOR (for Bank 2 Exhaust Side)
(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
A135699
INSTALLATION
1. INSTALL VVT SENSOR (for Bank 2 Exhaust Side)
(a) Install the VVT sensor with the bolt.
(b) Connect the VVT sensor connector.
A135699
2. INSTALL VVT SENSOR (for Bank 2 Intake Side)
(a) Install the VVT sensor with the bolt.
(b) Connect the VVT sensor connector.
A135700
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
ES–491
ES