Remove Camshaft Bearing Cap - Toyota 2GR-FE Manual

Front View
Knock Pin
2 6
1 5
7
4
6
9
5
8
2GR-FE ENGINE MECHANICAL – ENGINE UNIT
37. REMOVE CAMSHAFT BEARING CAP (for Bank 1)
(a) Check that the camshafts are positioned as shown
45°
A129700E01
(b) Uniformly loosen and remove the 8 bearing cap
8 4
7 3
A129701E03
(c) Uniformly loosen and remove the 12 bearing cap
10 1
(d) Remove the 5 bearing caps.
3
12
38. REMOVE CAMSHAFT
(a) Remove the camshaft.
2
11
39. REMOVE NO. 2 CAMSHAFT
A129702E01
(a) Remove the No. 2 camshaft.
in the illustration.
bolts in the sequence shown in the illustration.
bolts in the sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the
camshaft level.
EM–77
EM