Toyota 2GR-FE Manual page 819

LU–2
Adhesive
LU
2GR-FE LUBRICATION – LUBRICATION SYSTEM
(h) Remove the oil pressure gauge.
(i)
A050082E14
(j)
(k) Connect the oil pressure switch connector.
(l)
(m) Remove the engine under cover RH.
(n) Remove the engine under cover LH.
A127994
Apply adhesive to 2 or 3 threads of the oil pressure
switch.
Adhesive:
Toyota Genuine Adhesive 1344, Three Bond
1344 or equivalent
Using a 24 mm deep socket wrench, install the oil
pressure switch.
Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf)
NOTICE:
Do not start the engine within 1 hour after
installation.
Check for engine oil leaks.