Remove Intake Air Surge Tank Assembly - Toyota 2GR-FE Manual

RH Side: LH Side:
(b)
(a)
(c)
(a)
2GR-FE ENGINE MECHANICAL – ENGINE ASSEMBLY
(b) Disconnect the 2 clamps.
A132989
(c) Remove the 2 nuts and disconnect the engine
A078403E05
(d) Remove the bolt and disconnect the engine
62. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH (See
page DS-9)
63. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH (See
page DS-9)
64. REMOVE ENGINE WIRE
65. REMOVE STARTER ASSEMBLY (See page ST-141)
A132988
66. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
HINT:
See page AX-207.
67. REMOVE DRIVE PLATE AND RING GEAR SUB-
ASSEMBLY (See page EM-12)
68. SECURE ENGINE
(a) Secure the engine onto an engine stand with the

69. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

(a) Disconnect the 2 water by-pass hoses from the
(b) Disconnect the vapor feed hose.
(c)
(c) Disconnect the throttle with motor body assembly
(d) Disconnect the No. 1 ventilation hose.
A129464E01
mounting insulators RH and LH.
mounting insulator FR.
bolts.
throttle with motor body assembly.
connector and clamp.
EM–31
EM