Toyota 2GR-FE Manual page 845

CH–8
Charge Warning Light Comes ON while Driving
INSPECTION PROCEDURE
1
CHECK LOCK FUNCTION OF CLUTCH PULLEY
Free
OK
2
CHECK LOCK OF CLUTCH PULLEY
OK
REPLACE GENERATOR ASSEMBLY
CH
2GR-FE CHARGING – CHARGING SYSTEM
(a) Check the lock function with the pulley installed in the
vehicle.
(1) Visually check that the rotor in the generator
operates with the engine started.
(b) Check the lock function with the pulley removed from the
vehicle.
(1) Remove the generator pulley cap. Using SST, hold
the generator rotor.
(2) Turn the clutch pulley clockwise and check that the
outer ring locks.
OK:
Lock
SST
NG
A128078E01
(a) Start the engine and visually check looseness of the
clutch pulley.
OK:
The clutch pulley is not loose.
NG
The outer ring locks.
09820-63020
REPLACE CLUTCH PULLEY
TIGHTEN CLUTCH PULLEY TO THE
SPECIFIED TORQUE