Toyota 2GR-FE Manual page 128

2GR-FE ENGINE MECHANICAL – ENGINE UNIT
30 mm (1.18 in.) or more
A094936E04
SST
A129715E01
A131896
30 mm (1.18 in.) or more
A094935E05
SST
A129714E01
20. INSTALL EXHAUST VALVE
(a) Apply a sufficient coat of engine oil to the tip area of
the intake valve shown in the illustration.
(b) Install the valve, compression spring and spring
retainer to the cylinder head.
NOTICE:
Install the same parts in the same combination
to the original locations.
(c) Using SST, compress the spring and install the 2
retainer locks.
SST 09202-70020 (09202-00010)
(d) Using a plastic hammer, lightly tap the valve stem
tip to ensure a proper fit.
NOTICE:
Be careful not to damage the retainer.
21. INSTALL INTAKE VALVE
(a) Apply a sufficient coat of engine oil to the tip area of
the intake valve shown in the illustration.
(b) Install the valve, compression spring and spring
retainer to the cylinder head.
NOTICE:
Install the same parts in the same combination
to the original locations.
(c) Using SST, compress the spring and install the 2
retainer locks.
SST 09202-70020 (09202-00010)
EM–127
EM