Toyota 2GR-FE Manual page 910

ST–48
5
CHECK WIRE HARNESS (INSTRUMENT PANEL J/B - BATTERY AND BODY GROUND)
Wire Harness Side:
IA
OK
6
INSPECT INSTRUMENT PANEL J/B
Wire Harness Side:
Front Side:
ST
2GR-FE STARTING – SMART KEY SYSTEM
(a) Disconnect the IF and IA J/B connectors.
(b) Measure the resistance according to the value(s) in the
(c) Measure the voltage according to the value(s) in the
IF
A128037E03
(a) Measure the resistance according to the value(s) in the
IF
ACC Relay
Terminal
table below.
Standard resistance
Terminal No.
IF-10 - Body ground
table below.
Standard voltage
Terminal No.
IA-1 - Body ground
NG
REPAIR OR REPLACE HARNESS OR
CONNECTOR
table below.
Back Side:
Condition Specified Condition
Below 1 Ω
Always
Condition Specified Condition
Always 10 to 14 V
II
B138003E01