Toyota 2GR-FE Manual page 668

2GR-FE ENGINE CONTROL SYSTEM – ENGINE COOLANT TEMPERATURE SENSOR
INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE
SENSOR
(a) Install a new gasket to the engine coolant
temperature sensor.
(b) Install the engine coolant temperature sensor.
Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
(c) Connect the engine coolant temperature sensor
connector.
2. INSTALL NO. 1 AIR CLEANER INLET (See page
49)
3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See
page EM-50)
A135703
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-506)
5. INSTALL AIR CLEANER INLET ASSEMBLY (See page
EM-50)
6. INSTALL V-BANK COVER SUB-ASSEMBLY (See
page EM-52)
7. ADD ENGINE COOLANT (See page CO-6)
8. CHECK FOR ENGINE COOLANT LEAKS (See page
CO-1)
9. INSTALL ENGINE UNDER COVER RH
10. INSTALL ENGINE UNDER COVER LH
ES–501
EM-
ES