Toyota 2GR-FE Manual page 148

Timing Chain Cover:
3.0 to 4.0 mm (0.118 to 0.156 in.)
: Seal Packing
2GR-FE ENGINE MECHANICAL – ENGINE UNIT
51. INSTALL OIL PAN SUB-ASSEMBLY
(a) When replacing a stud bolt, install it by using an E8
Lower Cylinder Block:
(b) Install 2 new O-rings.
A129684
(c) Apply seal packing in a continuous line as shown in
A132232E01
"torx" socket wrench.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
the illustration.
Seal packing:
Toyota Genuine Seal Packing Black, Three
Bond 1207B or equivalent
Seal diameter:
3.0 to 4.0 mm (0.118 to 0.156 in.)
NOTICE:
• Remove any oil from the contact surface.
• Install the oil pan within 3 minutes after
applying seal packing.
• Do not start the engine for at least 2 hours
after installing.
EM–147
16 mm
(0.63 in.)
34 mm
(1.34 in.)
12 mm
(0.47 in.)
A134962E01
EM