Connect Engine Wire - Toyota 2GR-FE Manual

2GR-FE ENGINE MECHANICAL – ENGINE ASSEMBLY
A132981
B
A
A132976E01
A132975
A132978

55. CONNECT ENGINE WIRE

(a) Install the bolt and clamp to the bracket.
Torque: 8.4 N*m (85 kgf*cm, 74 in.*lbf)
(b) Install the 2 bolts and 2 clamps to the body.
Torque: Bolt A
12 N*m (123 kgf*cm, 9 ft.*lbf)
Bolt B
8.4 N*m (85 kgf*cm, 74 in.*lbf)
(c) Connect the wire to the engine room junction block.
Then, install it with the nut and 3 connectors.
Torque: 8.4 N*m (85 kgf*cm, 74 in.*lbf)
56. INSTALL RELAY BLOCK COVER UPPER
57. INSTALL ECM (See page ES-519)
58. CONNECT HEATER INLET WATER HOSE
(a) Connect the heater inlet water hose.
59. CONNECT HEATER OUTLET WATER HOSE
(a) Connect the heater outlet water hose.
EM–47
EM