Toyota 2GR-FE Manual page 707

2GR-FE EMISSION CONTROL – VENTILATION VALVE
Adhesive
A105280E01
A138519E01
A135715E01
INSTALLATION
1. INSTALL VENTILATION VALVE
(a) Install the ventilation valve.
(1) Apply adhesive to 2 or 3 threads.
Adhesive:
Part No. 08833-00070, THREE BOND 1324
or equivalent.
(2) Install the ventilation valve.
Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
2. CONNECT VENTILATION HOSE
(a) Connect the ventilation hose to the ventilation valve.
3. INSTALL V-BANK COVER SUB-ASSEMBLY (See
page EM-52)
EC–17
EC