Toyota 2GR-FE Manual page 497

OK
END
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
(f) Securely apply the parking brake and move the gear
selector lever to the D position (Procedure "A").
(g) While depressing the brake pedal securely, fully depress
the accelerator pedal for 5 seconds (Procedure "B").
(h) On the tester, enter the following menus: DIAGNOSIS /
ENHANCED OBD II / DTC INFO / CURRENT CODES.
(i) Read the DTCs.
HINT:
The output voltage of the throttle position sensor can be
checked during procedure "B" using the intelligent tester.
Variations in the output voltage indicate that the throttle
actuator is in operation. To check the output voltage
using the intelligent tester, enter the following menus:
DIAGNOSIS / ENHANCED OBD II / DATA LIST /
PRIMARY / THROTTLE POS #1.
OK:
No DTC output.
NG
REPLACE THROTTLE BODY ASSEMBLY
(See page ES-503)
ES–341
ES