Toyota 2GR-FE Manual page 746

Tube Joint Clip
O-Ring
Tube Joint Clip
Collars
CORRECT INCORRECT
2GR-FE FUEL – FUEL PUMP
3. CONNECT FUEL PUMP TUBE SUB-ASSEMBLY
(a) Install the fuel pump tube with the tube joint clip.
4. CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
Fuel Tube Joint
5. CHECK FOR FUEL LEAKS (See page FU-8)
Fuel Tube
Tube Joint Clip
Collars
A136247E01
6. INSTALL REAR FLOOR SERVICE HOLE COVER
(a) Connect the fuel pump connector.
(b) Install the rear floor service hole cover with new
7. INSTALL REAR SEAT CUSHION ASSEMBLY (for
Fixed Seat Type) (See page SE-84)
8. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold
Down Seat Type) (See page SE-58)
A129478
9. INSTALL REAR SEAT CUSHION ASSEMBLY (for
Reclining Seat Type) (See page SE-73)
NOTICE:
• Check that there are no scratches or foreign
objects on the connecting part.
• Check that the fuel tube joint is inserted
securely.
• Check that the tube joint clip is on the collar
of the fuel tube joint.
• After installing the tube joint clip, check that
the fuel tube joint is pulled off.
butyl tape.
FU–33
FU