Toyota 2GR-FE Manual page 657

ES–492
ES
2GR-FE ENGINE CONTROL SYSTEM – VVT SENSOR
3. INSTALL VVT SENSOR (for Bank 1 Exhaust Side)
(a) Install the VVT sensor with the bolt.
(b) Connect the VVT sensor connector.
A135702
4. INSTALL VVT SENSOR (for Bank 1 Intake Side)
(a) Install the VVT sensor with the bolt.
(b) Connect the VVT sensor connector.
5. INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See
page FU-18)
6. INSTALL NO. 1 AIR CLEANER INLET (See page
49)
A135701
7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See
page EM-50)
8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-506)
9. INSTALL AIR CLEANER INLET ASSEMBLY (See page
EM-50)
10. INSTALL V-BANK COVER SUB-ASSEMBLY (See
page EM-52)
11. INSTALL COOL AIR INTAKE DUCT SEAL (See page
EM-52)
12. INSTALL COWL TOP PANEL OUTER SUB-
ASSEMBLY (See page ES-485)
13. INSTALL WINDSHIELD WIPER MOTOR AND LINK
(See page WW-14)
14. INSTALL COWL TOP VENTILATOR LOUVER SUB-
ASSEMBLY (See page WW-15)
15. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
(See page WW-15)
16. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
(See page WW-15)
17. INSTALL WINDSHIELD WIPER ARM AND BLADE
ASSEMBLY LH (See page WW-15)
18. INSTALL WINDSHIELD WIPER ARM AND BLADE
ASSEMBLY RH (See page WW-16)
19. ADD ENGINE COOLANT (See page CO-6)
20. CHECK FOR ENGINE COOLANT LEAKS (See page
CO-1)
21. INSTALL ENGINE UNDER COVER RH
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
EM-