Toyota 2GR-FE Manual page 783

CO–18
CO
2GR-FE COOLING – COOLING FAN RELAY
COOLING FAN RELAY
ON-VEHICLE INSPECTION
1. COOLING FAN RELAY
(a) Remove the relay from engine room relay block No.
1.
(b) Measure the resistance of the relay.
Standard resistance
A035654
Tester Connection
3 - 5
3 - 5
If the result is not as specified, replace the cooling
fan relay.
(c) Install the relay to engine room relay block No. 1.
Specified Condition
10 kΩ or higher
Below 1 Ω
(when battery voltage is applied to
terminals 1 and 2)