Toyota 2GR-FE Manual page 803

2GR-FE EXHAUST – EXHAUST PIPE
A085549E01
Bracket
A132948E01
(b) Remove the gasket from the exhaust pipe
assembly.
3. REMOVE FRONT EXHAUST PIPE NO. 1 SUPPORT
BRACKET
(a) Remove the 2 nuts and front support brackets.
4. REMOVE EXHAUST FRONT PIPE ASSEMBLY
(a) Disconnect the 2 heated oxygen sensor (bank 1, 2
sensor 2) connectors.
(b) Remove the 2 nuts from the exhaust front pipe (left
bank exhaust manifold side).
(c) Remove the 2 nuts from the exhaust front pipe (right
bank exhaust pipe manifold side).
(d) Remove the exhaust front pipe.
(e) Remove the 2 gaskets from the exhaust front pipe.
5. REMOVE HEATED OXYGEN SENSOR (See page
21)
6. REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT
BRACKET
(a) Remove the 2 bolts and rear support bracket.
EX–3
EX
A135720
EC-