Remove Engine Wire; Remove No.2 Fuel Pipe - Toyota 7M-GE Repair Manual

.\
ENGINE MECHANICAL - Cylinder Head
-.
6. REMOVE ENGINE WIRE
(a) Disconnect following wires:
. fw/ TWC)
Oxygen sensor connector
l
Oil pressure sender gauge connector
l
Water temp. sensor connector
l
Water temp. sender gauge connector
_-
l
Cold start injector time switch connector
l
Distributor connector
.,
l
Injector connectors
l
Three VSV connectors
l
Knock sensor connectors
l
Ground strap from intake manifold
(b) Remove the engine wire from the each clamps.
7.
REMOVE PULSATION DAMPER, VSV AND NO.1 FUEL
PIPE
6.
REMOVE NO.2 FUEL PIPE
(a) Disconnect the fuel hose from the No.2 fuel pipe.
(b) Remove the union bolt, No.2 fuel pipe and
gaskets.
9. (7M-GTE)
REMOVE AUXILIARY AIR PIPE
10. (7M-GE)
REMOVE HIGH-TENSION CORDS AND DISTRIBUTOR
11. (7M-GE)
REMOVE OIL DIPSTICK
12. (7M-GTE)
REMOVE TURBOCHARGER
(See steps 5 to 7 and 9 to 15 on pages TC-IO-to 12):