Sds Check - Suzuki TU250X Service Manual

2-26 PERIODIC MAINTENANCE

SDS CHECK

Using SDS, sample the data at the time of new and periodic motorcycle inspections.
After saving the sampled data in the computer, file them by model and by user.
The periodically filed data help improve the accuracy of troubleshooting since they can indicate the condition
of motorcycle functions that has changed with time.
For example, when a motorcycle is brought in for service but the troubleshooting of a failure is not easy,
comparing the current data value to the past filed data value at time of normal condition can allow the spe-
cific engine failure to be determined.
Also, in the case of a customer motorcycle which is not periodically brought in for service with no past data
value having been saved, if the data value of a good motorcycle condition have been already saved as a
master (STD), comparison between the same models helps facilitate the troubleshooting.
• Remove the right frame cover. (8-3)
• Set up the SDS tool. (4-23)
 09904-41010: SUZUKI Diagnostic system set
99565-01010-020: CD-ROM Ver.20
NOTE:
* Before taking the sample of data, check and clear the Past DTC.
* A number of different data under a fixed condition as shown below should be saved or filed as sample.
SAMPLE:
Data sampled from cold starting through warm-up
Check the fast idle time.
Approx. XX sec.
Check the engine r/min.
XXXX r/min
Check the engine temperature.
XX ˚C
Check the manifold absolute pressure.
XX kPa