Character Input; How To Input Characters - Fuji Xerox DocuCentre 1085 User Manual

28
29
30
31
32
33
34

Character Input

This section describes how to enter characters using the control panel. Alphabets,
numbers, and symbols are possible for the machine. However, characters available are
limited for each item.

How to Input Characters

Enter characters in the following screen.
Entering Alphabets
Button/Indicator
<Copy>
<Fax>
<E-mail>
<Address Book>
<Address Enter/Next>
One Touch panels
One Touch buttons
Items
1 Select [Alphabet] in [Entry Mode] using the <Select> button.
2 Enter alphabets using the alphanumeric keypad on the control
NOTE: Each time you press the key, upper-case characters
assigned to the key display in alphabetical order one by one, then
lower-case characters appear in the same order.For example,
when pressing the <2> button, the character rotates in the following
order: A
Use this button to access the Copy function. Refer to
Copy chapter on page 49.
Use this button to access the Fax function. Refer to Fax
chapter on page 63.
Use this button to access the E- mail function used for
sending E- mail. Refer to E-mail chapter on page 87.
Allows you to select the destination registered in the
Address Book or the program registered in the Fax
Program.
Allows you to send a fax to the multiple destinations at
the same time.
Displays the number of One Touch buttons. Flip the
panel to access page 1 (001 to 018), page 2 (019 to
036), or page 3 (p01 to p18 for Fax Program).
Specifies Speed Dial or the Fax Program at a single
touch.
panel.
B C a
Function
Description
b c.
Character Input
33