Fuji Xerox DocuCentre 1085 User Manual page 118

7 CentreWare Internet Services
Protocol Settings
Emulation Settings
118
Feature name
Max. no. of pages for Split Send – Allows you to set the size
of outgoing e-mail in pages. You can specify a number
between 0 to 999 pages in 1 page increment. If 0 is
specified, outgoing e-mails will not be split.
POP User Name – Allows you to configure the POP user
address.
POP User Password – Enter the POP user password. Up to
64 characters can be entered.
Re-enter Password – Allows you to verify the configured
password by re-entering the same password.
SMTP Send Authentication – Select the check box to set
[POP before SMTP] for authentication method. When [POP
before SMTP] is enabled, you must set [POP3 Server
Address], [POP User Name], and [POP User Password].
SMTP Server Address – Up to 256 characters can be
entered, including . (full stop) and - (hyphen).
HTTP
This page allows you to configure the HTTP protocol
settings.
Port Number – Enter the port number that receives requests
from the browser.
Maximum Sessions – Enter the maximum number of
sessions between 1 and 15.
Connection Time-Out – Specifies the time-out period when
transmission fails.
Print Mode
This page allows you to specify the printer language to use
when a print job is sent using Parallel, USB, EtherTalk, SMB,
NetWare, LPD, IPP or Port9100. Only the enabled protocol
will be displayed.
Auto – Set the device so that it will automatically determine
and use the most suitable language to print data received
from the host device.
PostScript – Sets PostScript as the printer language.
PCL – Sets PCL as the printer language.
PJL – PJL is a command independent of printer languages.
Specify the printer language to use for the next job
regardless of the printer language that is currently being
used.
For information on KS/KSSM/KS5895 emulation modes,
refer to the User Guide for the Korean model.
Setting items