Tray 5 (Bypass Tray) - Fuji Xerox DocuCentre 1085 User Manual

NOTE: When making single/double sided
copies on perforated paper, load the paper
as shown in the figure on the right to feed
the opposite side of the perforated side
edge first. Feeding the perforated side edge
first might cause paper jams.
5.
If the paper guides have been moved,
slide the guides to just touch the edge of
the paper.
6.
Close the paper tray.
Paper can be loaded either short edge feed
or long edge feed.

Tray 5 (Bypass Tray)

Tray 5 (bypass tray) allows you to use a variety of paper sizes and types. Tray 5
(bypass tray) is located on the left-hand side of the machine. A tray extension is
provided to accommodate larger sized paper. After loading paper stock in the bypass
tray, the screen that allows you to select paper size and type is displayed. Specify the
paper size and type to match the size and type of stock loaded. If they do not match,
reprogramming is required. For more information about programming of Tray 5 (bypass
tray), Refer to [Paper Size] screen in the Copy chapter on page 55, and [Paper Type]
screen in the Copy chapter on page 56.
NOTE: To reduce unnecessary fuser and paper jams, it is important that the
programmed paper size and type is identical to the paper stock loaded.
Short edge feed Long edge feed
(SEF) (LEF)
Loading Paper
125