Fuji Xerox DocuCentre 1085 User Manual page 232

13 Glossary
Border limit
BPS
Bulletin Board
Chain Dialing
Collated
Comments
Communication (s)
Copy Sets
Custom Paper
Default Setting (s)
Delayed Polling
Delayed Start
Dial
232
One more sheet is used when the length of the transmitted
document exceeds the length of paper installed on the
receiving terminal. A margin at the bottom of a received
document can be eliminated so that the data can be printed on
one page. The amount of space that can be removed from the
bottom of a document is the border limit. When the border limit
value is small, the data is printed on the next page. But when it
is large, a larger space can be cut so that data can be printed
on one page.
An abbreviation of Bits Per Second. This is a measure of how
fast a modem can transmit or receive data.
Allows you to store documents in the specific box on the
machine and retrieve repeatedly the same documents using
the remote machines.
Specifies a destination combining multiple Speed Dial codes,
One Touch Dial, and dialing using the numeric keypad.
Output programming where each copy set is delivered in the
same order the documents were placed in the Document
Feeder. Example: Two copies of a three-page document
would output as page1/copy1, page2/copy1, page3/copy1,
page1/copy2, page2/copy2, page3/copy2.
To (recipient) and From (sender) lines on a fax cover page.
Communications network which can offer audio data
(telephone), image data (fax), picture data (videotext) and
computer data (computer communication service) over the
same channel. In this guide, referred to as transmitting and
receiving images as well as speaking with a remote user.
Groups of copies of a multi-page set of documents. If you
have a four-page document and want to make 10 copies of a
document, you will be making 10 copy sets.
A paper size that can be specified by user other than standard
size.
The settings used by the machine when the user does not
specify settings.
Retrieving documents from a remote fax machine at a delayed
time.
Programming that enables the machine to process a
document at a later time.
To use a telephone number for document transmission. The
methods of dialing provided by the machine include: manual
dialing using the numeric keypad, Speed Dialing, One Touch
Dialing, and using the Address Book, etc.