2.
Select [System Settings] using the
<Select> button.
3.
Enter the System Administrator
password using the numeric keypad on
the control panel.
NOTE: The default System Administrator password is "11111".
4.
Select [Confirm] using the <Select> button, or press the <Enter> button.
5.
Select [Common Settings] on the
[System Settings] screen using the
<Select> button.
6.
Press the <Enter> button.
7.
Select [Timer Settings] on the [Common
Settings] screen using the <Select>
button.
8.
Press the <Enter> button.
9.
Select the required option.
10.
Enter the value using the numeric
keypad.
NOTE: You may have to delete the existing value (by pressing the <C> button on the
control panel) before entering the new value.
11.
Press the <Enter> button.
Modes
The mode buttons are used to access the screens which allow you to select features,
monitor the status of jobs and obtain general information about the machine.
There are six mode buttons on the machine:
• Copy
• Fax
• E-Mail
• Log In/Out
• Job Status
• Machine Status
Modes
37