Fuji Xerox DocuCentre 1085 User Manual page 197

Symptom
Image loss
Misfeeds in the Tray 5 (bypass tray)
Jams in the document feeder.
Paper jams.
Paper curls.
Envelope jams.
Troubleshooting Tables
Recommendation
• When copying a document from a larger
paper size to a smaller size, reduce the
image to fit onto the smaller paper size.
• Set a slightly smaller document size (for
example, copy 90% instead of 100%).
• Select [Auto] on the [Paper Supply]
screen.
• Remove the paper and reload the tray. Do
not add paper to the tray when paper is
already loaded. Instead, remove the paper,
combine the additional paper with the
paper from the tray and then reload the
tray.
• Check that paper tray guides are locked
into position against the paper.
• Check that the settings for Tray 5 (bypass
tray) are correct and match the paper size
and type on the screen.
• Open the document feeder and check that
no paper or objects are inside.
• Check that the document feeder cover on
the document feeder is firmly closed.
• Refer to Document Jams on page 190 for
procedures.
• Check that the paper is loaded correctly.
Flip the paper over in the paper tray.
• Check that the paper tray guides are
locked into position.
• Do not use media that is torn, wrinkled, or
folded.
• Load fresh paper.
• Refer to Paper Jams on page 184 for
procedures.
• Check that the paper is loaded correctly.
Load paper in Trays 1, 2, 3 and 4 seam
side up.
• Load paper in Tray 5 (bypass tray) seam
side down.
• Load custom media in the Tray 5 (bypass
tray).
• Refer to the Paper and Other Media
chapter on page 123 for procedures.
• Refer to Paper Jams on page 184 for
procedures.
• The envelope can only be loaded in Tray 5
(bypass tray).
197