Paper Supply - Fuji Xerox DocuCentre 1085 User Manual

Paper Supply

Use this feature to select the paper tray containing the paper required for the job. The
available paper trays are displayed on the screen together with the media size and the
orientation preset for each tray. When the paper tray is selected, the paper type in the
tray is displayed on the screen.
When changing the type of media in trays 2, 3 and 4, the tray must be reprogrammed
by the System Administrator to match the media being loaded. For more information on
reprogramming the tray, contact the System Administrator or refer to Paper Type in the
Setups chapter on page 141.
For information on the sizes and types of media supported for the machine, refer to
Supported Paper Sizes and Types in the Paper and Other Media chapter on page 127.
1.
Press the < > or < > button to display
[Paper Supply] on the Copy screen.
2.
Select [Paper Supply] using the
<Select> button.
3.
Select the required option.
4.
Press the <Enter> button.
NOTE: The <Paper Supply> button on the control panel provides a quick way of using
this feature.
Auto
Selects an appropriate tray automatically according to the document size, amount of
reduction or enlargement.
NOTE: Only plain paper can be selected. Paper other than plain paper cannot be
selected by auto tray selection.
NOTE: Tray 5 (bypass tray) cannot be selected by auto tray selection.
Presets
Select a paper tray from Tray 1 to 5 depending on the trays available on the machine.
When Tray 5 (bypass tray) is selected, the [Paper Size] screen is displayed. After
selecting the paper size, the [Paper Type] screen is displayed.
[Paper Size] screen
This screen is displayed automatically when loading paper in Tray 5 (bypass tray). Use
this screen to select a paper size for Tray 5 (bypass tray). You can also enter a custom
paper size using the [Variable Size] screen.
Copying Features
55