Fuji Xerox DocuCentre 1085 User Manual page 196

11 Problem Solving
Output is too light or too dark.
Output is too light.
Uneven print
Blurred images
Missing characters
Gloss variations (coining)
Light copies when scanning glossy, shiny, or
coated documents through the document
feeder
Ghosting
Washout
Solid density variations
196
Symptom Recommendation
• Load fresh paper.
• Check the quality of the document.
• Set the [Lighten/Darken] feature to a
lighter or darker setting.
• Run off more prints until the copy quality
improves.
• Replace the drum cartridge.
• If the toner cartridge is new, the toner may
not be dispensed. Repeat the job.
• Run off more prints until the copy quality
improves.
• Set the [Lighten/Darken] feature to a
darker setting.
• Replace the drum cartridge.
• Replace the toner cartridge.
• Load fresh paper.
• Replace the drum cartridge.
• Replace the toner cartridge.
• Load fresh paper.
• Replace the drum cartridge.
• Replace the toner cartridge.
• Check the quality of the documents.
• If the document has large areas of solid
density, adjust the [Lighter/Darken] feature
for the contrast.
• Use the document glass instead of the
document feeder.
• Check the quality of the documents.
• If transparencies are used, select a paper
type of [Transparency] on the screen. The
machine automatically adjusts the quality
for transparencies.
• Feed the document SEF.
• Replace the toner cartridge.
• Check the quality of the documents.
• If the image is lighter near the borders, set
the [Lighten/Darken] feature to a darker
setting.
• Replace the toner cartridge.
• Check the quality of the documents.
• Set the [Lighten/Darken] feature to a
lighter or darker setting.
• Replace the drum cartridge.