Fuji Xerox DocuCentre 1085 User Manual page 194

11 Problem Solving
The machine does not accept documents into
memory.
The machine displays a memory full error
message.
The machine displays a message to prompt
you to load paper while scanning the
document.
The machine displays a message to prompt
you to load paper while outputting a copy job.
The machine displays a message to prompt
you to load paper when you place a
document on the document glass.
194
Symptom Recommendation
• Check with the System Administrator
about available memory.
• If the memory is almost full, print and
delete unnecessary files.
• Check with the System Administrator
about available memory.
• Divide the remaining pages of the job into
several small jobs and run the job again.
• Delete unnecessary documents to free up
some memory.
The sizes of paper currently loaded in the
trays are not suitable for the reduction/
enlargement ratio and document size
specified.
• Select a required paper tray. Any scanned
data is discarded, so load the document on
the document feeder again specify the
copy settings if necessary, and press the
<Start> button to restart the job.
• Load the correct sized paper in the
selected tray. Any scanned data is
discarded, so load the document on the
document feeder and specify the copy
settings if necessary, and press the
<Start> button to restart the job.
Load the correct sized paper in the selected
tray. The scanned pages before the message
is displayed will be printed out. Load the
remaining pages on the document feeder and
press the <Start> button.
The sizes of paper currently loaded in the
trays are not suitable for the reduction/
enlargement ratio and document size
specified.
• Select a required paper tray. To restart the
job, specify the copy settings if necessary,
and press the <Start> button.
• Load the correct sized paper in the
selected tray. To restart the job, press the
<Start> button.