System Settings - Fuji Xerox DocuCentre 1085 User Manual

• Primary IP, Secondary IP – These items are used to confirm the automatically
acquired address or manually set address. Enter addresses in the format
xxx.xxx.xxx.xxx. Each group of 3 numbers (xxx) must be within the range of 0 to 255.
When the primary IP address is invalid, the secondary IP address is also invalid.
Ethernet Settings
Sets the communication speed/connector type of the Ethernet interface. When [Auto]
is selected, 100BASE-TX or 10BASE-T is automatically selected. Select [100BASE-
TX] when fixing Ethernet to 100BASE-TX for use. Select [10BASE-T] when fixing
Ethernet to 10BASE-T for use.
IPX/SPX Frame Type
Specify the following types for IPX/SPX frame type: [Ethernet II], [Ethernet 802.3],
[Ethernet 802.2], or [Ethernet SNAP]. When [Auto] is selected, the frame type is
automatically specified.
Filter
• IP Filter – Specify whether or not to restrict acceptance of printing by the IP address.
When [On] is selected, only printing from registered address is accepted.
• IP Address – When restricting acceptance of printing by the IP address, register the
IP address for acceptance of printing. Up to ten IP addresses can be registered. The
registered IP address is needed to set with the IP address mask. Enter IP address
or IP mask in the format: xxx.xxx.xxx.xxx.xxx.
*1 When entering text, use the following items.
[Enter Number]: Select to enter numbers.
[Enter Alphabet]: Select to enter alphabetic characters.
[Text Input]: Select to confirm the entered text.

System Settings

Use this feature to specify the default settings for various printing reports or set
machine clock.
1.
Select the required option by selecting
[ ] or [ ] using the <Select> button.
2.
Press the <Enter> button.
3.
Perform the necessary operations.
4.
Press the <Enter> button. The selected option is indicated by an asterisk (*).
Offline Auto Clear
Specify whether or not to cancel the offline mode automatically. When [On] is selected,
specify the period of time within the range of 1 to 30 minutes in 1 minute increment.
Print Settings
147