Fuji Xerox DocuCentre 1085 User Manual page 30

2 Product Overview
Connector (LINE)
Located on the right-hand side of the machine. Connect a telephone cable to this jack.
Then connect the other end to the wall jack.
Document Feeder
There are two types of document feeder for the machine. One type is the ADF
(Automatic Document Feeder) which provides single-sided scanning, the other type is
the DADF (Duplex Automatic Document Feeder) which enables both sides of the
document to be scanned automatically.
Duplex Kit
Allows you to make double-sided copies.
For more information on how to make double-sided copies, refer to 2 Sided in the Copy
chapter on page 58.
Tray 1 to 4
Tray 1 is standard equipment and can hold a maximum of 250 sheets of 80 g/m
Tray 2, 3, and 4 can hold a maximum of 500 sheets of 80 g/m
to install Tray 3 and 4.
Center Output Tray
Delivers the printouts face down. This tray can hold 50 sheets of 80 g/m
Tray 5 (Bypass Tray)
Allows you to load custom size paper as well as standard paper. Also load other types
of sheets in this tray, such as transparencies and labels that cannot be loaded in
Tray 1. To load paper manually, open Tray 5 (bypass tray).
30
2
paper.
2
paper. Tray 2 is required
2
paper.