Notification Tone - Fuji Xerox DocuCentre 1085 User Manual

Common Settings
Job Complete
Specify whether to activate the tone when a job finishes successfully.
Machine Ready
Specify whether to activate the tone when the machine becomes ready for operations.
Notification
Specify whether to activate the tone before the machine restores the initial status.
Low Toner Alert
Specify whether to activate the tone when the machine nearly runs out of toner.
Alert
Specify whether to activate the tone when a problem occurs such as paper jam, toner
shortage, or fax transmission error.
Line Monitor
Specify whether to activate the tone when a Line Monitor is in use. A Line Monitor
allows you to hear call and response signals when connecting to a destination.
We recommended that you select [Enabled] when using On-hook dialing. Refer to On-
Hook in the Fax chapter on page 84.

Notification Tone

Use this feature to cause the machine to display a message before entering Power
Saver Mode or Low Power Mode, or clearing the settings.
Auto Clear
Displays a message before the machine clears the settings.
Low Power Mode
Displays a message before the machine enters Low Power Mode.
Duration
The machine displays a message the selected period of time before entering Low
Power mode or clearing the settings. Select the time within the range from 1 to 10
seconds. You can specify the time to display a message when [Auto Clear] or [Low
Power Mode] is set to [ON].
135