Transmission Report; Customize Screens; Screen Contrast - Fuji Xerox DocuCentre 1085 User Manual

Transmission Report

The machine automatically prints a report that shows the result of transmission.
Configure the following settings for this feature.
Single Destination
Configure the setting to be used when sending e-mail to a single destination. If you
select [Undelivered], the machine prints a report only when transmission fails.
Multiple destination
Configure the setting to be used when sending e-mail to multiple destinations. If you
select [Undelivered], the machine prints a report only when transmission fails. With [As
Single Dest's] selected, the machine follows the setting made for [Single Destination].
Original Image
Specify whether to print out scanned documents with a report.
NOTE: When [Original Image] is [On] and the report is printed on A4 paper, the
orientation of the printed report may not match that of the paper. This occurs because
the set orientation of the paper used for the report does not match the print orientation.
The paper used for printing reports should be A4, set to landscape orientation.

Customize Screens

Use this feature to rearrange the locations of menu items on the E-mail screen. After
selecting [Customize Screens], select the item you want to rearrange using the
<Select> button, and then select the new locations pressing the < > or < > button.

Screen Contrast

Use this feature to change the contrast on the screen.
1.
Select [Screen Contrast] on the [System
Settings] screen using the <Select>
button.
2.
Select the required option using the
<Select> buttons.
3.
Press the <Enter> button.
Screen Contrast
165