Fuji Xerox DocuCentre 1085 User Manual page 155

Fax Settings
• Mixed Super Halftone – Specifies a resolution for both photographs with dark and
light coloring and texts are on the same image.
Lighten/Darken
Adjust the default density of the scanned image in five levels. Move on the screen
by selecting [Darken] or [Lighten] using the <Select> button to select the density level.
Rotate 90°
Specify whether or not to automatically rotate the image to transmit. Select [On] when
the document can be transmitted without reducing the image size by rotating the image
orientation.
Redial
Specify the maximum number of redial attempts (0 to 15) and redial intervals (1 to 15
minutes).
Administrator Transfer
To manage the sending fax document using the machine, use this feature to send the
same document to the System Administrator after sending a fax. When [On] is
selected, you can select the fax number of the System Administrator from Address
Book. When [Enter Speed Dial] is selected, you can specify the fax number of the
System Administrator using the One Touch Dial button, or Speed Dial code. To
complete specifying the fax number, press the <Enter> button.
2-Sided Originals
Select the orientation binding of double-sided transmission. When [Rotate Side 2 on]
is selected, it is Top to Bottom. When [Rotate Side 2 off] is selected, it is Top to Top.
Stamp
Use this feature to stamp each sheet of a document as it passes through the document
feeder for scanning. When using this feature, the mark O is stamped of the scanned
page.
Specify to stamp or not, and to select the place of the stamp as Bottom Only or Top &
Bottom.
Delayed Start
Specify whether or not to specify the time to send faxes or start polling jobs, if the time
is specified, select [Hours] to enter the hour (0 to 23) or [Minutes] to enter the minutes
(00 to 59) for the delayed start time.
155