Fuji Xerox DocuCentre 1085 User Manual page 205

Code
016-752 The machine could not print the PDF file using ContentsBridge Utility
due to insufficient memory. Change the print mode in ContentsBridge
Utility as follows and try again.
• If the high quality mode is selected, change it to the standard mode.
• If the standard mode is selected, change it to the high speed mode.
016-753 A password entered for the PDF direct print is not correct. Enter a
password correctly.
016-755 The machine could not print the PDF file because it does not allow
printing. Open the file in Adobe Acrobat (not Adobe Reader) and
deselect the [No Printing] check box in the document security settings,
and print again.
016-757 A password entered is not correct. Enter a password correctly.
016-760 An error occurred during PostScript processing. Take one of the
following actions.
• Set for optimized speed in the print driver.
• Increase the size of the print page buffer.
• Increase PostScript memory.
016-761 An error occurred during image processing. Set for optimized speed in
the print driver and instruct the machine to print again. If this does not
rectify printing, set for highest compatibility to ensure printing and try
again.
016-762 A print language not supported on the machine was specified. Specify
the print language in [Print Mode].
016-764 Could not connect to the SMTP server. Contact the System
Administrator.
016-765 Could not send e-mail as the SMTP server was full. Contact the System
Administrator.
016-766 An error occurred on the SMTP server. Contact the System
Administrator.
016-767 Could not send e-mail as the e-mail address was wrong. Verify that the
e-mail address is correct, and try sending the e-mail again.
016-768 Could not connect to the SMTP server as the e-mail address of the
machine was incorrect. Check the e-mail address of the machine.
016-769 The SMTP server does not support delivery confirmation (DSN). Send
e-mail without setting confirmation.
016-790 • Reduce scanning resolution.
• Decrease the scanning area.
• Add memory for printer.
081-702 A fax transmission parameter was wrong. Check the settings of the PCL
driver.
081-704 User cancels the process of the job.
Description and Corrective Action
Fault Codes
205