Lighten/Darken
Use this feature to adjust the density when [Lighten/Darken] set to [Auto] for copying
documents, or specify the default density for copying documents.
Auto Adjust
Select lighten or darken the image for copying when [Lighten/Darken] set to [Auto] for
copying documents.
Manual Adjust
Specify the default density for copying documents.
Paper Supply
Specify which tray is to be used initially for copy jobs. If you select [Auto], the machine
automatically selects an appropriate tray according to the document size, amount of
reduction or enlargement.
Reduce/Enlarge
Use this feature to configure the default settings for the reduction/enlargement ratio for
copying.
Default %
Select the default reduction/enlargement ratio.
Custom %
Allows you to specify a reduction/enlargement ratio as a preset. Specify the required
ratio using the < > or < > button. If a value is entered in error, press the <C> button
to clear the entered value, and then enter the reduction or enlargement ratio using the
numeric keypad on the control panel.
Copy Settings
139