System Controls - Fuji Xerox DocuCentre 1085 User Manual

System controls

1
2
3
4
5
6
7
8
9
10
1 2
34
33 32
Button/Indicator
<Manual Dial>
<Direct Send>
<Fax Transmitting>
<Jobs in Memory>
<Job Status>
<Select>
< >< >
<Machine Status>
<Dial Pause>
<Speed Dial>
3 4 5 6
31 29 30 28 27 26 25 24 23 22 21
Allows you to send and receive documents manually.
This button works only for faxing with the document
feeder; When the document is loaded into the feeder,
you can press the button only for sending. When the
document is not loaded into the feeder, you can press
the button only for receiving.
NOTE: Press the <Manual Dial> button before setting
the recipient or functions. Pressing the <Manual Dial>
button resets the specified recipient and set functions.
Allows you to use the direct send feature. Refer to
Direct Send in the Fax chapter on page 79.
Indicates that data is being transmitted or received.
Indicates there is data stored in the machine.
Use this button to view the progress of a job. Refer to
Job Status on page 39.
Allows you to select options displayed on the screen.
Each press of the <Select> button moves you up one
option.
Use these buttons to switch between screens. You can
also use them to move the cursor in the entry field.
Displays the status of the machine. Refer to Machine
Status on page 41.
Enters a pause in a telephone number when
transmitting a fax.
Allows you to specify the fax number or e-mail address
using Speed Dial codes.
System controls
10
7 8 9
20 19 18
Function
11 12 13 14
16
17 15
31