Table of Contents
Advertisement
Note
• If you select [Service Selection Screen], the [USB Device Detected] screen is displayed when a USB
• If a USB memory device is inserted when the machine is switched off, and then you switch on, the
• When a USB memory device is inserted into the USB memory slot during the Power Saver mode, the
• If a commercially available Memory Card Reader is used and it is left inserted all the time, the screen
Display Consumables Screen
Allows you to select whether or not to display the consumables status when a replacement
is required.
Off
Does not display the consumables status screen.
When power is switched on
Displays the consumables status screen at startup.
When Auto Clear is activated
Displays the consumables status screen when Auto Clear is executed.
Keyboard Input Restriction
Allows you to select whether or not to restrict the display of the virtual keyboard of the
machine. To prevent characters from being garbled when switching character sets, you can
limit input to ASCII characters. If you select [On (ASCII Only)], the keyboard displayed
shows ASCII characters only.
Operation of Up/Down Buttons
Allows you to whether or not to enable continuous scrolling when pressing the scroll buttons.
Flick and Double-tap
Set whether or not to operate the machine by flicking and double-tapping. Select from
[Disabled] or [Enabled].
memory device is inserted. You can select [Store to USB] or [Media Print - Text].
Services Home screen is displayed.
touch screen does not light up. After exiting the Power Saver mode by pressing the <Power Saver>
button, insert the USB memory device again or select the feature to be used on the Services Home
screen.
is not switched to the selected screen even when a medium is inserted into the slot of the Memory
Card Reader.
Common Service Settings
117
5
Advertisement
Table of Contents
