Setups; Setups Procedure - Fuji Xerox DocuCentre 1085 User Manual

9 Setups

This chapter, written for the System Administrator, describes how to change various
defaults preset on the machine, how to register various items such as mailboxes and
the Address Book, and how to configure or change various Auditron settings.
NOTE: Some features may not be available depending on the machine configuration.

Setups Procedure

Follow the steps below to start changing the default settings, registering items such as
mailboxes and Address Book, and configuring the Auditron settings.
1.
Press the <Log In/Out> button on the
control panel.
NOTE: If the Auditron feature is enabled,
press the < > button to select [System
Settings].
2.
Select the required option using the
<Select> button.
System Settings – page 132
Screen Contrast – page 165
Create/Delete – page 166
3.
If you selected [System Settings], enter
the correct System Administrator
password using the alphanumeric
keypad on the control panel, and select
[Confirm] using the <Select> button or press the <Enter> button.
NOTE: The default System Administrator password is "11111".
4.
Perform the necessary operations.
<Log In/Out> button
131