Speed Dial; One Touch Dial - Fuji Xerox DocuCentre 1085 User Manual

5 E-mail

Speed Dial

This feature allows you to specify the e-mail address quickly using a 3-digit code
assigned to the destination. If you register the e-mail address to Speed Dial code 123,
you can only enter 123 and specify automatically the registered e-mail address
assigned to Speed Dial code 123. You can register up to a total of 200 Speed Dial
codes combining fax numbers and e-mail addresses. When you register Speed Dial
codes 001–036, their codes are automatically assigned to One Touch Dial buttons on
the control panel. Speed Dial codes are listed and can be searched in the Address
Book. For more information on how to register Speed Dial codes, refer to Speed Dial
in the Setups chapter on page 166.
1.
Press the <Speed Dial> button on the
control panel.
2.
Enter a 3-digit code.
NOTE: If the 3-digit code entered is correct, the destination is displayed. If it is
incorrect, you are prompted to re-enter a 3-digit code.

One Touch Dial

This feature allows you to select preset Speed Dial codes 001–036 using One Touch
Dial buttons. One Touch Dial consists of the following three pages and you can change
the page using the flip cards.
• Page 1 displays Speed Dial codes 001–018.
• Page 2 displays Speed Dial codes 019–036.
• Page 3 displays Fax Programs p01–p18. (Fax Program is unavailable for the E-mail
feature)
1.
If necessary, flip One Touch panels to
access the required One Touch button.
2.
Press the One Touch button.
94
<Speed Dial> button
One Touch buttons