Stop The Copy Job; Copying Features - Fuji Xerox DocuCentre 1085 User Manual

3 Copy

Stop the Copy Job

Follow the steps below to manually cancel an activated copy job.
1.
Press the <Stop> button on the
control panel to cancel the
current copy job.
2.
If required, press the <Job
Status> button on the control
panel to display the Job Status
screen. To exit the Job Status
screen, press the <Job Status>
button.
3.
Select [Stop (Delete)] using the
<Select> button to clear the suspended
job.

Copying Features

This section describes the various features available for a copy job. For more
information about the features available, refer to the following.
Paper Supply – page 55
Reduce/Enlarge – page 56
Lighten/Darken – page 57
Original Type – page 57
Multiple-Up – page 58
2 Sided – page 58
Output – page 60
Mixed Size Originals – page 61
1.
Press the <Copy > button on the control
panel.
2.
Press the < > or < > button to switch
between screens.
3.
Select the required features.
NOTE: Some features may not be available
depending on the machine configuration.
54
<Stop> button
<Job Status> button <Select> button