Fuji Xerox DocuCentre 1085 User Manual page 234

13 Glossary
Frame Type
G3
Halftone
Header
Input
IP
ITU-T
Job
Keypad
Landscape
Line Type
Long Document
Long Edge Feed (LEF)
Low Power Mode
Mailbox
Mailbox Polling
Manual Receive
Mask Data
Memory
Node
234
A group of data sent through the network.
Facsimile communication systems standardized by the
advisory committee for International Telecommunications
(CCITT, now the ITU-T).
Grey patterns that are neither black nor white.
A heading printed on the first line of received documents.
The documents placed on the Document Glass, or in the
Document Feeder, to be scanned.
An abbreviation for Internet Protocol. This is a communication
protocol of the network layer and is supported by a variety of
computer platforms. IP controls the routing of the data.
Acronym for the International Telecommunications Union. This
group used to be called the CCITT, and is responsible for
standardizing facsimile communications.
A group of copy, fax or print data. The canceling and
outputting of copying, faxing, and printing is done on a job
basis.
The buttons on the control panel.
The image orientation on a sheet of paper, where the short
edge of the paper runs from top to bottom.
The dial type of connected line. You can choose 10 pps, Tone,
etc for the Line Type.
A document that is longer than 17.0 inches (431.8 mm).
The long edge of the paper is positioned to enter the machine
first.
A Power Saver Mode that reduces power consumption when
the machine is not in use.
A storage area in the memory of the machine where fax
documents are stored.
Retrieves a document from the mailbox of a remote machine.
A fax mode that starts receiving a fax after you have
communicated with a caller and confirmed that the call is a fax
job.
Mask data is displayed as special characters in the place of the
private data. Data is masked when the forward slash key (/) is
selected.
A capacity for storing documents.
A number that identifies on access point on a network. It
works like an address.